dust and paint containment

The series of ceiling filters are mainly used in surface spray-paint industry, especially for final filtration in spray booth, which is processed by high-powered non-woven of anti-break synthetic fibers. With gradual technology, the fiber density increases gradually toward pure air, high filter efficiency.

Floor Filter or Glass Fibre paint arrestor filter are good to trap paint overspray and protect the environment from air pollutions.

Trap dust and overspray with 3M™ Dirt Trap Protection Material. Our white non-woven covering material is specially created to protect paint booth walls and floors, and brighten the work areas. It gives better visibility for technicians and a more pleasant shop look for collision repair customers. Engineered for a Cleaner Shop Developed to trap dust, dirt and paint overspray, our 3M™ Dirt Trap Nonwoven Protection Material reduces labor and costs related to continuous removal of paint and dirt from high traffic areas in your collision repair shop. Unlike common floor protection paper or wall protection sheets, it features a nonwoven construction specially engineered to trap dust, dirt, paint particles and other airborne contaminants. This helps to control dust in the air and prevent overspray from settling on walls or floors. The material applies quickly and easily, and a low tack adhesive backing keeps it in place even in high traffic areas. You can also use it to help protect other areas and equipment in the shop such as table tops, paint scales, paint mixing rooms, prep bay areas and more. Wall and Floor Protection Made Easy Our Dirt Trap Nonwoven Protection Material is available in rolls up to 56 inches wide to fit a range of room sizes with a minimum of product waste. Technicians can simply unroll the material from portable 3M™ Material Applicators or 3M™ Dirt Trap Material Dispensers. Applicators feature foam rollers that adhere and smooth the material as it unrolls, and the material can also be easily applied from a dispenser using a squeegee. When the material is ready for replacement, simply peel it off and apply a new layer. And the white color of the dirt trap material creates a brighter shop environment for customers, and increases visibility for technicians – it’s much easier to find dropped nuts, bolts or small hardware. The Science of Staying Clean Our Dirt Trap Nonwoven Protection Material showcases how solid science can create a cleaner, more efficient collision repair shop. From its nonwoven construction – engineered by 3M specifically to trap dust and other airborne particles – to its low tack adhesive backing that keeps it solidly in place yet allows for easy peel-off removal, this material delivers simple solutions that make it easy to get the most out of your shop today and for the future.

The 3M™ Masking Film Dispenser is a simple, convenient way to keep masking films, overspray protection and other plastic sheeting at your fingertips to keep the shop – and the work you do – clean and professional. The heavy-duty portable frame rolls easily and keeps 90 cm (36 inch) sheet rolls locked into place, ready for roll-out. Double steel spring brakes keep the unit stable during application. Store and dispense 3M™ Masking Films and 3M™ Plastic Sheeting in the most convenient locations in your auto body shop with our 3M™ Masking Film Dispenser. Lightweight with an easy-to-grip frame, the dispenser can be used horizontally or vertically. Wheels make it easy to move into place to dispense material over vehicles or designated “clean” shop areas. It can be wall mounted to create maximum floor space. A spring-loaded end frame makes it fast and easy to load 90 cm (36-inch) rolls of 3M plastic sheeting or masking film (sold separately) into the dispenser. A locking tape hub assembly keeps the roll securely in place for ease of use. The sheeting feeds through a spring guide for easy access and a simple pull-out motion. Double steel spring brakes keep the unit from rolling or tipping during use.

3M™ Masking Paper is a brown masking paper, specifically manufactured for automotive aftermarket applications. It is a traditional product for protecting areas of the vehicle to be protected from paint overspray during collision repair. 3M™ Masking Paper is designed for masking parts of the vehicle when applying primers, coatings and paints typically used in collision repair. The top side surface of the Masking Paper is specially treated to give excellent adhesion to paints, avoiding flaking issues throughout the refinish process. 3M™ Masking Paper is easily cut and fixed with to the car with 3M™ Masking tapes. For safe cutting action, use 3M™ Masking Film Cutter also for paper.

3M™ Masking Paper is a brown masking paper, specifically manufactured for automotive aftermarket applications. It is a traditional product for protecting areas of the vehicle to be protected from paint overspray during collision repair. 3M™ Masking Paper is designed for masking parts of the vehicle when applying primers, coatings and paints typically used in collision repair. The top side surface of the Masking Paper is specially treated to give excellent adhesion to paints, avoiding flaking issues throughout the refinish process. 3M™ Masking Paper is easily cut and fixed with to the car with 3M™ Masking tapes. For safe cutting action, use 3M™ Masking Film Cutter also for paper.

3M™ Overspray Protective Sheeting is a paintable, high density and tear-resistant translucent film for critical edge masking as well as for paint overspray. We make our overspray protective sheeting in a variety of sizes to protect various types of vehicles, including cars, vans, SUVs and trucks. 3M™ Overspray Protective Sheeting shields cars. trucks or vans from overspray while being repainted. Our specially formulated high density polyethylene film (HDPE) offers excellent paint adhesion and paint overspray adhesion. It resists paint flaking, which eliminates the need for masking paper at the critical paint edge. The sheeting clings to vehicle and has center printing for easy alignment, which makes it easy to handle. Sheeting easily cuts to any size needed for a project. Using overspray protective sheeting eliminates the need for masking paper to skirt the lower part of the vehicle. Our protective sheeting protects a variety of dry surfaces in addition to vehicles. Protective sheeting is perfect for protecting floors, walls, cabinets, stationary tools or any other object found in a automotive body shop or garage. Using 3M™ Overspray Protective Sheeting can eliminate costly and labor intensive cleanup and rework due to paint that reaches locations other than the intended target area. Paint overspray can significantly degrade the quality of the finished product, adversely affecting gloss and contributing to orange peel. Protective sheeting is a simple and inexpensive way to manage and control the impact of overspray.

3M™ Overspray Protective Sheeting is a paintable, high density and tear-resistant translucent film for critical edge masking as well as for paint overspray. We make our overspray protective sheeting in a variety of sizes to protect various types of vehicles, including cars, vans, SUVs and trucks. 3M™ Overspray Protective Sheeting shields cars. trucks or vans from overspray while being repainted. Our specially formulated high density polyethylene film (HDPE) offers excellent paint adhesion and paint overspray adhesion. It resists paint flaking, which eliminates the need for masking paper at the critical paint edge. The sheeting clings to vehicle and has center printing for easy alignment, which makes it easy to handle. Sheeting easily cuts to any size needed for a project. Using overspray protective sheeting eliminates the need for masking paper to skirt the lower part of the vehicle. Our protective sheeting protects a variety of dry surfaces in addition to vehicles. Protective sheeting is perfect for protecting floors, walls, cabinets, stationary tools or any other object found in a automotive body shop or garage. Using 3M™ Overspray Protective Sheeting can eliminate costly and labor intensive cleanup and rework due to paint that reaches locations other than the intended target area. Paint overspray can significantly degrade the quality of the finished product, adversely affecting gloss and contributing to orange peel. Protective sheeting is a simple and inexpensive way to manage and control the impact of overspray.

Eliminate rework of unwanted paint lines and save time with 3M™ Soft Edge Foam Masking Tape PLUS. Our tape is ideal for masking door apertures, bonnet or boot lid openings that need to be sealed off during an automotive painting job. The off-set adhesive keeps adhesive away from the paint edge. The unique two-layer foam tape is completely flexible so that it conforms to unique contours and is easily workable. Get Professional-Looking Paint Transition Lines 3M™ Soft Edge Foam Masking Tape PLUS is a versatile masking product that can be applied in jamb areas. Designed to be applied to moving parts such as doors, hoods or deck lids. Our tape makes the jamb masking process fast and easy. The hollow tubular construction and the off-set adhesive reduces paint-to-adhesive contact for cleaner paint lines, ease of installation and a more universal size to fit variety of jamb configurations.. Our foam masking tape saves time, money and reduces the amount of materials needed to seal jambs, and helps to reduce rework due to unwanted tape lines. Easier Work and Better Results We made this masking foam so that painters could easily mask both wide and narrow jamb openings in one simple step. Our masking foam tape is much easier and quicker to use than using conventional masking tape and masking paper. The off-set adhesive keeps adhesive away from the paint edge and the tubular design easily conforms and seals openings. The result is improved soft edge masking performance and a high quality finish. A Jamb Masking Foam Made for Automotive Painting Our masking foam was specifically made to address real concerns expressed by automotive paint technicians. Its unique two-layer foam construction reduces the need for compounding and buffing by improving the paint edge quality. A tape liner provides protection to prevent adhesive contamination. The product has an adhesive that allows the tape to be repositioned if the first placement is not exactly correct.

3M™ Soft Edge Foam Masking Tape protects door jambs, hoods or any area of a vehicle that needs to be sealed off while being painted. The foam tape provides a soft edge to prevent hard paint lines. The polyurethane foam structure tape is completely flexible so that it conforms to unique contours and is easily workable. This tape is available in multiple sizes to meet specific needs. Softens Paint Lines 3M™ Soft Edge Foam Tape eliminates rework due to unwanted overspray and hard paint lines. Ordinary flat masking tape can leave hard paint lines when used inside jambs, or must be rolled in order to create a soft edge. Because of its unique three-dimensional construction, 3M™ Soft Edge Foam Masking Tape produces a virtually undetectable edge faster than traditional jamb masking techniques. It seals door jambs and other openings to protect them from paint overspray. In addition, dust and other contaminants are contained, preventing them from ruining your paint job. The tape can also be left in place during paint finishing to help reduce compound and polish sling from entering jamb areas. Made for the Unique Needs of Automotive Body Technicians Our foam tape makes the job easier while improving end results. If the tape is not perfectly positioned the first time, thats not a problem - specially formulated adhesive allows for removal and repositioning. This masking tape is also designed to withstand paint booth bake cycles, ideal for automotive restoration and paint work.

3M™ Acrylic Foam Tape GT7108 is a 10 mm acrylic foam tape for attaching interior and exterior parts to unpainted TPO and PP surfaces as well as traditional automotive paints. A viscoelastic foam core allows for shrinkage and elongation to maintain adhesion during temperature changes. The adhesive applied to both sides performs under high and low temperatures and resists weather and solvents. For Bonding to Unpainted TPO, Polypropylene and Traditional Automotive Paint Developed for attaching a range of automotive trim and other interior and exterior components, 3M™ Acrylic Foam Tape GT7108 features dark gray, 10 mm acrylic foam core with adhesive applied to both sides. The adhesive delivers excellent adhesion to unpainted thermoplastic polyolefin (TPO) and polypropylene (PP) surfaces as well as traditional automotive paint. It has been tested for high final adhesion, peel and shear strength, and resists temperature extremes, humidity, weather and solvents. The foam core delivers excellent wet out, and features viscoelastic properties that allow the tape to shrink and elongate with automotive parts during temperature changes for a consistent, reliable bond. The conformable core also delivers stress relaxation when exposed to high loads, and maintains tight bond line aesthetics under normal conditions. The inconspicuous gray color of 3M™ Acrylic Foam Tape GT7108 helps ensure high high satisfaction among consumers. The orange liner provides easy one piece release and efficient tape application.

Scotch® Fine Line Tape 218 is a high-performance polypropylene plastic tape that has both a low profile and high adhesion for use in painting long straight lines and sweeping curves where a crisp, sharp paint line is desired. It is often used as a layout tape for high value multi-color and custom painted graphics. Perfect Your Straight Lines and Sweeping Curves Scotch® Fine Line Tape 218 features a natural rubber pressure adhesive capable of delivering the high instant adhesion necessary for critical, large scale paint applications. This tape has proven itself to be ideal for painting long, straight lines as well as smooth, sweeping curves. The polypropylene backing is stiffer than vinyl fine line tapes, while conforming easily around corners. Scotch® Fine Line Tape 218 features good moisture and solvent resistance. It resists heat in bake cycles that reach 250ºF/121ºC for up to 30 minutes.