spray guns and paint system accessories

Our 3M™ Accuspray™ Atomizing Heads for 3M™ PPS™ Series 2.0 deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray™ ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, 3M recommends 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint company’s recommendations. Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray™ ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns. Along with the distinctive color, the fluid tip size is presented clearly on each atomizing head for fast, accurate selection. Atomizing heads are see-through to make it easy for technicians to determine that the head is properly cleaned. All atomizing heads work with the 3M™ PPS™ Series 2.0 Spray Cup System – a system of reusable paint cups and disposable lids and liners, so you can be done with cleaning paint cups forever. ONE gun – ONE system for a complete range of applications.

Our 3M™ Accuspray™ Atomizing Heads for 3M™ PPS™ Series 2.0 deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray™ ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, 3M recommends 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint company’s recommendations. Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray™ ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12” vertical or horizontal spray patterns.

The 3M™ Accuspray™ Regulator and Air Flow Control Valve is a vital component for the Accuspray™ HVLP spray gun system. For use with any 3M™ Accuspray™ spray gun, it allows technicians to set and adjust air flow for each specific paint application, maximizing paint quality and cost savings. It can also be used with other spray guns or equipment requiring air pressure control, such as stone chip applicators. As one simple unit that allows you to easily set and adjust HVLP air pressure, our 3M™ Accuspray™ Regulator and Air Flow Control Valve is a vital part of our Accuspray™ paint application system. This regulator and control valve in one helps ensure that operators are applying paint and other auto body materials at the optimal air pressures, greatly reducing excessive orange peel and other common causes of increased sanding and rework. With a simple twist, you can set operating air pressures for the proper flows during first stage or full trigger application and easily adjust for factors including fluid viscosity, temperature, atomizing head size and more. It makes for better consistency across jobs, too, since operators can record the readings used on one application and use them again on other, similar jobs. The Regulator and Air Flow Control Valve features single knob operation, a clear, easy-to-read gauge and secure fittings for quick integration onto a 3M™ Accuspray™ spray gun and into the 3M™ Accuspray™ system. It can also be used on non- Accuspray™ spray guns and equipment such as stone chip applicators where adjustable air pressure is important.

3M™ Performance Gravity HVLP Atomizing Heads are designed to deliver premium spray performance for coatings including paints, clear coats and topcoats. Replaceable nozzles are built exclusively for gravity feed applications with the 3M™ Performance Spray Gun System and 3M™ PPS™ Series 2.0 Spray Cup System, offering like-new spray performance with the change of each nozzle. What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomizing head – it's like getting a brand new spray gun every time you swap the nozzle. Get the pattern control, atomization and transfer efficiency you expect from a premium spray gun — all while helping to drive more consistent spray performance across each job, every day. 3M™ Performance Gravity HVLP Atomizing Heads are available in 1.2, 1.3, 1.4, 1.6, 1.8, and 2.0 for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats.

3M Performance Pressure Nozzle is designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure-feed applications using the 3M™ Performance Spray Gun, offering like-new spray performance with the change of each nozzle. What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomizing head – it’s like getting a brand-new spray gun every time you swap the nozzle. Get the pattern control, atomization and transfer efficiency you expect from a premium spray gun – all while helping to drive more consistent spray performance across each job, every day. 3M Performance Pressure HVLP Atomizing Head Refill Kit 26818 are available in sizes 1.1, 1.4 and 1.8 atomizing heads for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats. The replaceable nozzles of 3M Performance Pressure HVLP Atomizing Head Refill Kit 26818 are used exclusively with the 3M™ Performance Spray Gun system and attach to a supply hose for continuous, bulk spraying from a pressure pot or pressure tank. The atomizing heads attach to the 3M™ Performance Spray Gun whip hose and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.

Details 3M™ Performance Pressure HVLP Atomizing Heads are designed to deliver excellent spray performance for coatings including stains, primers, base coats, topcoats, clear coats and adhesives. Replaceable nozzles are built exclusively for pressure-feed applications using the 3M™ Performance Spray Gun, offering like-new spray performance with the change of each nozzle. What makes the 3M™ Performance Spray Gun system different is the technology inside the quick-change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun – and only the atomizing head – it's like getting a brand-new spray gun every time you swap the nozzle. Get the pattern control, atomization and transfer efficiency you expect from a premium spray gun – all while helping to drive more consistent spray performance across each job, every day. 3M™ Performance Pressure HVLP Atomizing Head Refill Kits are available in sizes 1.1, 1.4 and 1.8 atomizing heads for spraying a wide range of industrial and automotive coatings, including high-viscosity coatings, sprayable fillers, high-build primers, primer surfacers, sealers, single-stage top coats, solvent-based paints, waterborne paints and clearcoats. The replaceable nozzles are used exclusively with the 3M™ Performance Spray Gun system and attach to a supply hose for continuous, bulk spraying from a pressure pot or pressure tank. The atomizing heads attach to the 3M™ Performance Spray Gun whip hose and are tightly secured to the spray gun with a specially-designed locking collar. No additional tools required for changeouts. Simply remove the nozzle from the spray gun, and either appropriately clean the fluid tip or replace it to keep your spray gun performing like new.

3M™ Performance Spray Gun Ball Valve is an accessory for the 3M™ Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressure source (pot or pump) at the spray gun end of the supply hose. Recommended for use when the painter does not have easy access to the pressure source. Light and easy to use. The addition of a 3M™ Performance Spray Gun Ball Valve allows a painter to quickly stop flow of liquid to the 3M™ Performance Spray Gun when the spray gun is set up as a pressure feed sprayer. This valve is recommended whenever the painter cannot easily access the pressure source (e.g. on a ladder or a long distance away). The lightweight valve is compatible with both waterborne and solvent-based coatings. It attaches to the whip hose at the bottom end of the spray gun handle. Valve has one male and one female threaded fitting. The quarter-turn handle aligns parallel to the hose when it is open, perpendicular when it closed. Use with the 3M™ Performance Spray Gun, an innovative solution designed with the industrial painter in mind. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a full range of coatings while delivering like-new performance with every new nozzle.

The unique 3M™ Performance Spray Gun Locking Collar helps ensure a solid connection between the 3M™ Performance Spray Gun and 3M™ Performance Atomizing Heads. The locking collar is easy to use, allowing for quick nozzle changes while switching between paints and coatings or for cleanup at the end of a job. The easy-grip tabs make it easier to turn the locking collar. The 3M™ Performance Spray Gun Locking Collar secures 3M™ Performance Atomizing Heads to the 3M™ Performance Spray Gun with a quick twist, helping ensure a good seal and stable nozzle position. Works with the full range of 3M™ Performance Spray Gun atomizing heads for both gravity feed and pressure feed spraying. The locking collar is easy to use, allowing for fast nozzle changes when switching between paints or coatings. It can also speed disassembly for cleanup without the need for additional tools.

The 3M™ Performance Spray Gun Rebuilt Kit provides the replacement parts needed for rebuilding the 3M™ Performance Spray Gun. Includes exterior replacement parts as well as all required interior seals, springs, screws and parts. Instruction manual provides specific details on how to rebuild. The 3M™ Performance Spray Gun Rebuilt Kit includes the pieces required for a complete rebuild of the 3M™ Performance Spray Gun. Ideal for helping to reduce downtime on the job with quick and easy reassembly of the spray gun. Using the included instruction manual, owners can disassemble the spray gun to replace its needle, springs, seals, all original fasteners, and other parts. The kit includes a replacement welded frame and exterior locking collar. Once properly rebuilt, the 3M™ Performance Spray gun can spray like new. Note: Do not maintain or service the spray gun other than how it is detailed in the instruction manual. Use with the 3M™ Performance Spray Gun. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial and automotive conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a wide range of coatings while delivering like-new performance with every new nozzle.

The 3M™ Performance Spray Gun Needle is designed specifically for 3M™ Performance Spray Gun. Use this replacement needle when the existing spray gun needle is damaged, bent, the gun leaks through its nozzle, or as routine preventative maintenance. The 3M™ Performance Spray Gun Needle is designed as a replacement part for the 3M™ Performance Spray Gun. Rigid non-reactive stainless steel construction is easy to clean and resists bending. It attaches to the spray gun's trigger and flow control knob to give the painter precise control of the spray gun's flow rate and atomization. Efficiently stops fluid flow when the spray gun trigger is released. This replacement-part needle gives the spray gun a performance tune-up without the effort of a full spray gun rebuild.

The 3M™ Spray Gun Pressure Whip Hose connects to the 3M™ Performance Spray Gun for use in pressure feed applications. Provides a fast connection between the atomizing head and the pressurized paint supply hose. Securely fastens to the spray gun base for better balance and hose control. Can be used with optional ball valve to control paint from the pressure line. The 3M™ Performance Spray Gun Pressure Whip Hose connects the 3M™ Performance Spray Gun to a supply hose for continuous, bulk spraying from a pressure source (pot or pump). The whip hose features a quick connect coupling to attach it to 3M™ Performance Spray Gun Pressure Nozzles. The other end of the hose has a standard threaded connection to attach it to either a supply hose or an optional ball valve. A unique stabilizing bracket at the threaded connection end of the hose, secures the hose to the base of the spray gun with a ball detent clevis pin. The attachment helps the technician control their hoses, reduces strain on the hose and fittings and helps improve spray gun balance. The hose connects to the atomizing head with a quick quarter turn, making the spray gun easy to set up, easy to break down and easy to swap out nozzles. Use with the 3M™ Performance Spray Gun, an innovative solution designed with the industrial painter in mind. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a wide range of coatings while delivering like-new performance with every new nozzle.

What makes the 3M performance spray gun system different is the technology inside the quick change replaceable nozzles. Because paint and coatings never pass through the body of the spray gun and only the atomizing head its like getting a brand new spray gun every time you swap the nozzle. Get the pattern control, atomization and transfer efficiency you expect from a premium spray gun all while helping to drive more consistent spray performance across each job, every day. 3m performance gravity help atomizing head refill kit includes five 1.3 size nozzles, ideal for clearcoats, waterborne base coats, solvent base color, primer sealer, wet on wet primer.